Programming Channel Control Lock; To Activate Channel Control Lock; To De-Activate Channel Control Lock - Universal Electronics MillenNium 4 User Manual

PROGRaMMinG CHannel
COnTROl lOCK
By activating this feature, the Millennium 4 will
only allow access to the channel control capabili-
ties of your cable converter. This will guarantee
that you do not inadvertently change the channel
on your TV or VCR.

To activate Channel Control lock:

1. On the Millennium 4, press and hold
seTuP until the LED blinks twice, then
release seTuP.
2. Enter 9 - 7 - 3. The LED will blink twice.
3. Press CH + once. The LED will blink
twice.
4. Now, regardless of what mode you select
(i.e., TV, VCR, or Cbl), only the channel
control capability of your cable converter
will be accessible.
NOTE: This feature does not affect the Audio
mode.

To De-activate Channel Control lock:

1. On the Millennium 4, press and hold
seTuP until the LED blinks twice, then
release seTuP.
2. Enter 9 - 7 - 3. The LED will blink twice.
3. Press CH – once. The LED will blink
twice.
4. The Millennium 4 will again provide TV
and VCR channel control capabilities
while in the TV or VCR mode.
33