Millennium 4 Mnl M4090
PROGRAMMING CHANNEL CONTROL LOCK
By activating this feature, the Millennium 4 will only
allow access to the channel control capabilities of your
cable converter. This will guarantee that you do not inad-
vertently change the channel on your TV or VCR.
To Activate Channel Control Lock:
1.
On the Millennium 4, press and hold SETUP
until the LED blinks twice, then release SETUP.
2.
Enter 9 - 9 - 6. The LED will blink twice.
3.
Press CH + once. The LED will blink twice.
4.
Now, regardless of what mode you select (i.e.,
TV, VCR, or CBL), only the channel control capa-
bility of your cable converter will be accessible.
NOTE: This feature does not affect the Audio mode.
To De-Activate Channel Control Lock:
1.
On the Millennium 4, press and hold SETUP
until the LED blinks twice, then release SETUP.
2.
Enter 9 - 9 - 6. The LED will blink twice.
3.
Press CH – once. The LED will blink twice.
4.
The Millennium 4 will again provide TV and
VCR channel control capabilities while in the
TV or VCR mode.
21
7/23/99 9:34 AM
Page 21