Programming Tv Control; Setup Codes For Tvs - Universal Electronics MillenNium 4 User Manual

PROGRaMMinG TV COnTROl

Locate the brand name of your TV in the Setup
Codes For TVs section below, and write it in the
following space.
TV Brand: _________________________________
The brands are listed in alphabetical order with the
most popular codes listed first. You will use one of
these codes to program the Millennium 4 to oper-
ate your TV:
1. Turn on the TV.
2. On the Millennium 4, press TV once.
Press andhold seTuP until the LED
blinks twice, then release seTuP.
3. Enter the first four-digit code for your
TV. If you perform this procedure cor-
rectly, the LED will blink twice.
NOTE: If the LED did not blink twice after
entering the code's last digit, then repeat steps 2
through 3 and try entering the same code again.
4. Aim the Millennium 4 at your TV and
press POWeR once. The TV should turn
off. If it does not respond, repeat steps
2-3, trying each code for your brand until
you find one that works. If it still does
not work, try searching for the code (see
Searching For Your Code on page 38).
5. Write your TV code in the boxes below
for future reference.
NOTE: Remember, to use the Millennium 4 to operate
your TV, press TV first.

setup Codes for TVs:

A-Mark
Abex
Admiral
Advent
Adventura
Aiko
0003
0032
0093, 0463
0761, 0783, 0815, 0817, 0842, 1933
0046
0092
continued on next page...
8