Canon imagePRESS C1 P Service Manual page 301

Chapter 5
6) Detach the upper rear face cover 3 [1].
<In case of ADF>
- 2 screws [2]
[1]
<In case of Copyboard Cover>
- 1 screws [1]
[1]
7) Remove the filter [2] of the sub station top rear cover [1].
- 6 screws [3]
Be sure to tighten the 2 screws on the top while pressing the upper rear
cover in the direction of the arrow.
[3] [2]
[3]
[1]
8) Remove the connector base [1].
- 2 screws [2]
5-22
F-5-74
F-5-75
[3]
[3]
F-5-76
9) Detach the reader rear cover [1].
- 1 connector [2]
- 5 screws [3]
[2]
[3]
10) Detach the reader upper rear cover [1].
- 1 screw [2]
- 1 embossed section [3]
[1] [3]
11) Remove the magnet support [1].
- 2 screws [2]
[1]
<In case of ADF>
12) Remove the document tray [1].
- 2 screws [2]
[1]
[2]
F-5-77
[1]
F-5-78
[2]
F-5-79
[2]
F-5-80