Canon imagePRESS C1 P Service Manual page 302

<In case of Copyboard Cover>
13) Detach the upper right cover [1] for the copyboard cover.
- 2 screws [2]
- 2 cover rubbers [3]
[3]
[2]
14) Detach the reader right cover [1].
- 3 screws [2]
[2]
(Only in case of ADF)
15) Detach the reader upper right cover [1].
- 2 screws [2]
[2]
[1]
F-5-81
[3]
[1]
[2]
F-5-82
[1]
[2]
[2]
F-5-83
[2]
(Subsequent steps are applied only for the ADF)
16) Detach the CCD unit cover [1].
- 9 screws [2] (3 screws at the right side of the reader)
[2]
Point to Note When Attaching CCD Unit
Cover
Be sure to hook the CCD unit cover onto the 2 claws
[2] and secure it in place with the screws when
attaching it.
[1]
17) For the subsequent steps, see step 11 to 14 in 'Removing Scanning Lamp'
(in the case of imagePRESS C1 Series).
Chapter 5
[1]
F-5-84
[1]
[2]
[2]
F-5-85
[1]
F-5-86
[2]
5-23