DataCard CD820 User Manual page 41

6.
Replace the print ribbon cartridge. Avoid bumping the printhead when you install the print
ribbon cartridge.
7.
Close the printer cover. Press down on the ridges on the front of the cover to make sure that
it latches completely on both sides. Close the supplies access door on the optional multi-
hopper and lock the printer.
8.
Power on the printer.
9.
Print a sample card to verify the quality of printing. Refer to
more information.
H & T
INTS IPS
Avoid touching the printhead edge with your fingers. Contamination due to skin oils

eventually can damage the printhead.
Avoid touching the printing edge of the printhead cartridge with any sharp objects that can

permanently damage the printhead.
Use only the cleaning swab to clean the printhead. Other materials can stick to the printhead

and cause damage.
Use a cleaning swab one time only. Discard it after you clean the printhead.

CD820 Instant Issuance System User's Guide
"Print a Test Card" on page 20 for
29