Basic Operation - Sekonic i-346 Operating Manual

1.800.561.8187

4. Basic Operation

4-1. Basic Operation Flowchart and Setting the Measuring Mode
1)... To...enter...the...Custom...Setting...to...select...either...Lux...or...FC,...hold...
the...Mode...Button ③ and...press...the...Power...Button ① .
2)... Select...the...measurement...mode...by...pressing...the...Mode...Button...
③ or...Timer...Button ⑧ ....Measuring...modes...are...switched...
according...to...the...chart...below.
Power...ON
Mode...Button ③ to...select
Timer...Button ⑧ to...select
Hold...Mode...Button ③ and...press...
Power...Button ① to...enter
① Power...
MODE
... Button
③ Mode...
... Button
TIMER
⑧ Timer...Button

www.
Continuous...
(See...page...9)
Measuring...Mode
Single
(See...page...9)
Measuring...Mode
Timer...Measuring...
(See...page...10)
Mode
Custom...Setting
(See...page...11)
④ Measuring...
... Button
information@itm.com
.com