System Information; Checking System Power - Raymarine STV Gen2 Installation And Operation Manual

3.5 System information

You can use the ACU to display system product serial numbers and
software versions.
The procedure for doing this is described as part of the maintenance
procedures.
38

3.6 Checking system power

With the ACU in setup mode:
1. Press the NEXT softkey to cycle through the options until the
VIEW POWER? screen is displayed.
The following information is displayed sequentially:
• ACU POWER
• ANT POWER (antenna power)
• IRD power.
2. To leave the power display, press EXIT.
The SETUP MODE? entry screen is then displayed.
3. Press either:
• YES if you want to use another setup function, or
• NO to re-initialize the system.
STV Gen2 installation and operation