Ramsey Electronics COM3010 User Manual page 97

Button Description
8 Enters an "8"
9 Enters a "9"
0 Enters a "0"
. Enters a "."
- Enters a "-"
STO Starts memory save
SEQ Selects a sequence
Property of Ramsey Electronics, Inc.
REG Selects a register
SHIFT Selects the shift function
Do not reproduce or distribute.
MHZ/-dBm Enters units for active field
kHz/mV Enters units for active field
Hz/uV Enters units for active field
ENTER Enter on the current field
RECEIVE FM Sets receiver into receive
FM mode
RECEIVE AM Sets receiver into AM mode RX STEP SIZE Allows entry of the frequency step
COUNTER Cycles through the available
frequency counters
METER Cycles through the bottom
SELECT measurement meters
@COUNT Sets receiver to the current
frequency count
Nav Buttons Allows cycling through lists
and entering values
Shift Description
SINAD1K Macro for setting up SINAD test-
ing.
SINAD400 Macro for setting up SINAD test-
ing.
PWR SAVE Turns off the displays to save
power.
ZOOM ME- Zooms the current Freq Meter.
TER
DELETE Deletes current memory
None
None
None
GEN ON/OFF Toggles the generator on and off.
GEN ON/OFF Toggles the generator on and off.
GEN ON/OFF Toggles the generator on and off.
ESCAPE Aborts entering of the current
field.
RX STEP SIZE Allows entry of the frequency step
and rounding size.
and rounding size.
MOD OFF Turns off all active modulation
modes.
ALT METER Cycles through the top measure-
ment meters
None
BKSPC/DEL Can delete characters during entry
97
APPENDIX