Generating A Frequency; Setting Frequency Steps/Increments - Ramsey Electronics COM3010 User Manual

BASIC OPERATION

2.01 Generating a Frequency

GENERATE
Modulation
Enter the frequency desired by using the numerical keypad. Use either the
kHz/mV key to select your desired units. The COM3010 is now generating the frequency you
entered.
Example:
Property of Ramsey Electronics, Inc.

2.02 Setting Frequency Steps/Increments

GENERATE
Do not reproduce or distribute.
Modulation
SHIFT key and then the proper
To Set Generator Frequency increment press the
the "delta F" Icon will appear in the Generator Frequency field. It will also show the value that
is currently stored. Enter the new desired increment value using the numerical keypad. Press
the appropriate units button for step size desired. (
may now use the UP
increment value.
Example:
If you want to escape in the middle of an entry, press
TX Level
Seq/Reg
TX Level
Seq/Reg
FUNCTION
or DOWN arrow keys to change the generate frequency by the desired
The Frequency Range of the Generator is 100
kHz to 1 GHz in 1 Hz steps. To enter a new
generator frequency, press the
key. The "Ft" Icon will flash.
At times you may want to step through fixed
increments of Generate Frequency, RF Level,
and Modulation. The Receiver function will
also work in this manner. To set the
INCREMENT for a given function press the
key.
SHIFT key, then press the
MHz/-dBm, kHz/mV,
14
GENERATE
MHz/-dBm or
GENERATE key;
or Hz/uV ) You