Ramsey Electronics COM3010 User Manual page 67

GENERATE
Modulation
General Options:
These are accessed by pressing
On the GENERATE screen:
The Buzzer is toggled on and off using the
Cable Comp: adds 1 dB to the power reading at 1 GHz, linearly declining to 0 dB of added
power at 0 Hz. Use the
Property of Ramsey Electronics, Inc.
The Round function turns the rounding feature of the
press the key until the circle is filled.
The Pass function will prevent the use of the COM3010 until the proper password is entered.
Pressing the key allows the user to change the password. Password security on the
Do not reproduce or distribute.
COM3010 is tight! If you forget your password the only way to unlock the COM3010 is to
send it in for repair! The standard repair fee applies for Ramsey to reset the password. As
soon as you change the password, WRITE IT DOWN IN THIS MANUAL!!! Many users will
change the password to see how it works and immediately forget their newly created
password. This password was designed to discourage equipment from being stolen since it
will render the COM3010 useless to anyone but the person with the password. The modem
password for serial access is separate from the user interface password.
By default, the password is set to 1234. If you wish to change it, the new password should be
something that is easily recalled. Please write it where it will not be lost. The password can
be from1 to 9 characters long.
To Enter a new password
1. Press
2. Enter the new password using the numerical keypad. Example: 5678.
3. Press twice.
4. Re-enter the new password even though the old password appears in the display.
5. Press twice.
6. Write the new password down!
TX Level RECEIVE
Seq/Reg Counter
SHIFT, 6, then the GENERATE
key and turns all buzzer events on or off.
button to toggle this feature on and off.
67
ADVANCED FEATURES
key.
COUNT buttons on or off. To select
Level Meters
Freq Meters