Scanner - Ramsey Electronics COM3010 User Manual

ADVANCED FEATURES

4.30 Scanner

The scanner function is used to monitor known frequencies for proper operation. The
scanner function will allow sweeping through any sequence of memories that are pre-
programmed into the COM3010. This allows scanning of up to100 channels in a single
sweep. The more channels stored, the longer the scan times.
When setting up scan channels choose an open sequence. We recommend using a memory
location in the range from 80-98 to store scanner sweeps.
It is not necessary to enter your sweep frequencies in numerical frequency order; the
COM3010 will automatically sort the order. This allows for faster frequency locks during the
sweep process. Keep in mind when saving frequencies that the only parts of the memories
recalled during a sweep are the Receive AM/FM and the frequency. All other portions of
memory are ignored to keep the sweep fast and to simplify setup.
To Set Up a Three-Frequency Sweep
Property of Ramsey Electronics, Inc.
1. Select RECEIVE AM or RECEIVE FM
or
2. Enter the frequency to be scanned.
Do not reproduce or distribute.
3. Press
4. Select an unused sequence. Example: 90
]
5. Press and the information is stored in the "00" register.
6. Enter another frequency. Example: 475.45 MHz.
7. Press
8. Enter sequence number 90.
9. Press and the information is stored in the "01" register.
10. Enter the last frequency in our series, 455.25 MHz.
62