Ramsey Electronics COM3010 User Manual page 88

DETAILED INFORMATION
6.50.03 SET Commands (Continued...)
SET GSTEP ###.#####
#MHz
SET GUP
SET GDOWN
Receiver Side
Major Sub-
Com- Command
mand
SET RF
Property of Ramsey Electronics, Inc.
SET RAM
SET RFM
SET COUNTERM
Do not reproduce or distribute.
ODE
SET LMETER
SET UMETER
SET POWERME-
TER
SET RSTEP
SET FUP
SET FDOWN
0.0MHz
Format Low
###.#### 0.100000
#MHz MHz
# 1
# 1
# 1
ON/OFF ON
###.#### 0.0MHz
##MHz
1000.000000 OK/BAD
MHz
OK/BAD
OK/BAD
High Returns
1000.00000 OK/BAD
MHz
6 OK/BAD
8 OK/BAD
4 OK/BAD
OFF OK/BAD
1000.000000 OK/BAD
MHz
OK/BAD
OK/BAD
88
Get generator
frequency step
Generator up one
step
Generator down one
step
Description
Set Receiver frequency
AM Receive mode
FM Receive Mode
Set Counter Mode (see
counter mode lists)
Set Lower Meter Mode
(See valid meter mode
lists) Except for Sinad
Mode (9)
Set Upper Meter Mode
(See valid meter mode
list)
Sets the power meter dis-
play on or off (big meter).
You will need to turn it off
to regain generator con-
trol after testing power.
Returns BAD if power still
present and cannot be
turned off. ON forces me-
ter on without power pre-
sent.
Set receiver step size
Receiver up one step
Receiver down one step