Ramsey Electronics COM3010 User Manual page 101

COM3010 SPECIFICATIONS
Receiver:
•
Frequency: 100 kHz to 1.0 GHz
•
Step size: 10 Hz
•
Sensitivity: Less than 2 uV, 1 MHz to 512 MHz; less than 3 uV, 512 MHz to 1 GHz; un-
specified, 100 kHz to 1 MHz
•
FM Demod: 0 to 7 kHz, 0 to 4 kHz
•
AM Demod: 0 to100%
•
CTS Decode: In AF frequency count
•
Frequency error: 0 to1 MHz, two methods of bargraph and count
•
AF Demod output: 1 Vp-p for 7 kHz deviation
•
Gates: 0.1 Sec, 1 Sec
Audio counter:
•
Frequency Range: 60 Hz to 3000 Hz
•
Gates: 10 Sec variable gate for 1 Sec quick updates
•
Sensitivity: 35 mV at demod audio, 750 Hz deviation
Property of Ramsey Electronics, Inc.
Frequency counter:
•
Frequency Range: 100 kHz to 1.0 GHz
•
Low Band Sensitivity: Less than 10 mV under 70 MHz, 1 Hz and 10 Hz resolutions
•
High Band Sensitivity: Less than 10 mV, 70 MHz to 1.0 GHz, 10 Hz and 100 Hz
Do not reproduce or distribute.
resolutions with divide by ten pre-scaler
•
IF Frequency: Receiver sensitivity. Frequency range limited to bandwidth of current
set receive frequency, 10 kHz. 1 Hz and 10 Hz resolutions
General:
•
Receiver input has diode protection and fused parts
•
Battery life: 1 hour per battery pack, 3 battery packs maximum
•
Controls: Elastomeric
•
RS232 Control: Serial interface provides external function control and automated cali-
bration
•
Dummy Load: 100W 30 dB attenuator included, 25% duty cycle for rated power,
30dB sample port on rear panel
•
Primary Power: 100-240 VAC, .6A, 50/60 Hz. Built-in 1 hour battery pack (holds 2
additional battery packs for 3 hour battery life
•
Stand: Bottom mounted tilt bail stand included
•
Supplied Accessories: 110 VAC EIA power cord, BNC-BNC test cable, whip antenna,
one BP3010 Li-Ion battery
•
Case color: Mist gray epoxy powder coat
•
Dimensions: 6" H x 11.9375" W x 14.75" D (152.4 mm H x 303.21 mm W x 374.65
mm D)
•
Weight: 14 lbs (6.5kg)
101