Check Before Going To Sea; Servicing And Safety - Raymarine Maxiview ST80 Operation & Setup

62

6.3 Check Before Going to Sea

• Always check the installation before going to sea to make sure that it
is not affected by radio transmissions, engine starting etc.
• In some installations, it may not be possible to prevent the equipment
from being affected by external influences. In general this will not
damage the equipment but can lead to it resetting, or momentarily
may result in faulty operation.

6.4 Servicing and Safety

• Autohelm equipment should be serviced only by authorised
Autohelm service engineers. They will ensure that service
procedures and replacement parts used will not affect performance.
There are no user serviceable parts in any Autohelm product.
• Some products generate high voltages, and so never handle the
cables/connectors when power is being supplied to the equipment.
• Always report any EMC related problem to your nearest Autohelm
dealer. We will use any such information to improve our quality
standards.
ST80 Maxiview Operation & Setup