ST80 Maxiview Operation & Setup
Speed Chapter
The following screen is displayed for 2 seconds when entering speed
setup. The key sequences shown are only available during this
period.
SPEED
SET-UP
CHAP 1S FOR
INSTRUMENT CHAPTER
Press this key to
advance to the next
chapter.
Response Pages
Response is used to control the speed at which screens are updated.
The response range is from 0 to 15. A high number results in rapid
changes of the displayed data while a low number gives a slow but
smooth update.
maxiview
Press this key for 1
second to return to the
instrument chapter.
37
remote
D2500-1