Lat/Lon Mob; Incomplete Mob Data - Raymarine Maxiview ST80 Operation & Setup

ST80 Maxiview Operation and Setup
• The dead reckoned screen is displayed providing data is available.
• Fields where data is not available appear as dashes.
• The elapsed time is displayed in minutes and seconds.
• The displayed bearing and range is to the man in the water.

Lat/Lon MOB

MOB
078 TRUE
1.2 NM
Press this key momentarily
to display dead reckoned
information if available.
• This screen is displayed upon entry to MOB if dead reckoned
information is not available.
• Time data may not be shown if the man-overboard data is not
sourced from ST80.

Incomplete MOB Data

If there is insufficient data to provide range, bearing and elapsed
time, the following screen is displayed during an MOB condition.
maxiview
POS 08:30
maxiview
MAN
OVER
BOARD
33
remote
D2543-1
remote
D2544-1