Resetting The Contrast; Data Lost; Man Overboard And Alarms; Man Overboard - Raymarine Maxiview ST80 Operation & Setup

32

Resetting the Contrast

The display contrast can, during local or system illumination
adjustment, be reset to the factory default by pressing the page key
for 1 second.

2.10 Data Lost

If a chapter that is dependent on a given quantity, e.g., speed, wind,
depth, and this data is lost for more than 8 seconds, a warning screen
is displayed until the data is restored.
WARNING
SPEED CHAPTER
NOT AVAILABLE
DATA LOST

2.11 Man Overboard and Alarms

Man Overboard

Man overboard displays are triggered when a man overboard
condition exists on SeaTalk. These displays replace the current
display until the condition no longer exists.

Dead Reckoned MOB

MOB
078 TRUE
1.2 NM
Press this key momentarily
to display Lat/Lon
information if available.
ST80 Maxiview Operation and Setup
maxiview
maxiview
DR
08:30
remote
D2560-1
remote
D2542-1