Raystar 112Lp (Seatalk Version) - Raymarine hsb2 PLUS Series Owner's Handbook Manual

B-4

Raystar 112LP (SeaTalk version)

To connect your Raystar 112LP to your display, refer to the first illustration
below or follow the instructions in Chapter 8.
To connect the Raystar 112LP and your Differential Beacon Receiver, cut off
the 5-pin connector and strip back the red, black and green wires. Remove the
sleeve from the end of the Raystar 112LP cable to expose the green and brown
wires, then connect to the Auxiliary Junction Box as shown in the second
illustration below.
CAUTION:
Ensure the correct polarity of the 12 V supply before applying display or
SeaTalk power. It is recommended that a multimeter is used to check the
connections.
To Display Unit
SeaTalk Socket
Black
12V
Power
Supply
Red
(fused)
To Display Unit
SeaTalk Socket
Black
12V
Power
Supply
Red
(fused)
PLUS Series LCD Display
hsb 2
Screen
From
Red GPS
sensor
Yellow
D4292-3
Screen
Red
From
Yellow
GPS
Green sensor
Brown
Black
White
From
Red the
Green DBR
Yellow
D4296-3