Raymarine hsb2 PLUS Series Owner's Handbook Manual page 47

Chapter 2: Getting Started & Adjusting the Display
The standard radar picture is displayed again, with the active waypoint joined
to your vessel's position by a dotted line. If the waypoint is off-screen, the
dotted line is extended to the edge of the radar picture.
Figure 2-7:
Custom Options - Chart mode
When chart details have been customized in the Chart Set Up menu (as
described in Section 7.7) the SCREEN soft key can be used to switch the custom
chart options off or on:
When set to ON, all chart options set to CUSTOM in the Customize Chart menu
are displayed; when set to OFF, options set to CUSTOM are not shown.
The factory default for custom chart options is ON.
➤ To switch the customized options on or off:
1. Press the SCREEN default soft key.
2. Press the CUSTOM soft key to toggle the setting from OFF to ON or from ON
to OFF.
To return to the default soft key display, press ENTER.
Active Waypoint on a Radar Display
2-15
Active waypoint
D3989-2