Raymarine hsb2 PLUS Series Owner's Handbook Manual page 20

1-8
Half-Screen Window Options
• Chart display, Radar display: If data is available as a function of the
combined display unit it can be displayed full screen, as shown in
Figure 1-2, or in a half-screen window.
• CDI: This gives the Course Deviation Indicator graphical display, with
data relating to the target waypoint.
• BDI: This gives the Bearing and Distance Indicator graphical display, with
data relating to the target waypoint.
• Nav Data: This shows ninedata boxes, providing navigational data in the
units specified in your set up. Note that up to 6 of these data boxes are also
available as a user-selectable group (see Section 7.3).
You select the operating mode and windows using the DISPLAY key as
described in Chapter 2.
Multi-display systems
If you have several
operation is similar to acombined Pathfinder Radar/Chartplotter Unit: three
full-screen modes – radar, chart and data log are available on all displays.
In addition, if you have an
set any display to fishfinder mode; if the system includes a chartplotter, similar
functionality to a combined Fishfinder/Chartplotter is available on all
displays.
On an
information can be shown on any display unit:
Table 1-2:
Full-screen mode
Chart Mode,
Radar Mode
Fishfinder Mode
Data Log Mode
For details on the fishfinder, refer to the
Handbook supplied with your fishfinder.
hsb 2 series Radar and Chartplotter displays connected
hsb
hsb 2 system with Radar, Chart and Fishfinder available, the following
Window Options for Integrated Systems
hsb
2 series Fishfinder display connected, you can
Half-screen Window Options
CDI, BDI, Nav Data, Fishfinder or Radar
CDI, BDI, Chart or Nav Data
Depth/temp, Chart or CDI, BDI
Windows not available
hsb 2 Series Display Owner's
PLUS Series LCD Display
2