Raymarine hsb2 PLUS Series Owner's Handbook Manual page 133

Chapter 5: Standard Chart Operations
➤ To save waypoints to, or load waypoints from a user cartridge:
CAUTION:
Loading waypoints from a user cartridge overwrites any existing
waypoint and route lists.
1. Insert a C-MAP User Card into the lower of the two cartridge slots.
1. Press MARK S followed by the LOAD/SAVE USER CARD soft key.
MARKS
2. The User Card Menu and associated soft keys are displayed.
3. Press the SAVE WPT/RTE DATA TO CARD or LOAD WPT/RTE DATA FROM
CARD soft key; an appropriate warning and Yes/No soft keys are displayed.
4. Press Yes to continue or No to abandon the operation and return to the pre-
vious screen.
5. If the operation is successful, confirmation of the number of Routes and
Waypoints saved/loaded is displayed.
If the operation fails, the Save Failed message is displayed.
USER CARD MENU
USER CARD MENU
5-35