Ftp Ipv6 - HP A8800 Series Fundamentals Command Reference

The source IP address specified with the ftp client source command applies to all FTP connections while
the one specified with the ftp command applies to the current FTP connection only.
Related commands: display ftp client configuration.
Examples
# Specify the source IP address of packets sent to an FTP server as 2.2.2.2.
<Sysname> system-view
[Sysname] ftp client source ip 2.2.2.2
# Specify the IP address of interface GigabitEthernet 3/1/1 as the source IP address of packets sent to
an FTP server. (This interface must be operating in Layer 3 mode.)
<Sysname> system-view
[Sysname] ftp client source interface GigabitEthernet 3/1/1
[Sysname]

ftp ipv6

Syntax
ftp ipv6 [ server-address [ service-port ] [ vpn-instance vpn-instance-name ] [ source ipv6
source-ipv6-address ] [ -i interface-type interface-number ] ]
View
User view
Default level
3: Manage level
Parameters
server-address: IP address or host name of the remote FTP server.
service-port: TCP port number of the FTP server, in the range of 0 to 65535. The default value is 21.
source ipv6 source-ipv6-address: Specifies a source IPv6 address for transmitted FTP packets. This
address must be an IPv6 address that has been configured on the router.
-i interface-type interface-number: Specifies the type and number of the egress interface. This parameter
can be used only in case that the FTP server address is a link local address and the specified egress
interface must have a link local address. For the configuration of link local addresses, see Layer 3—IP
Services Configuration Guide.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN the FTP server belongs to. The
vpn-instance-name argument is a case sensitive string of 1 to 31 characters. If the FTP server is on the
public network, do not specify this option.
Description
Use ftp ipv6 to log in to the FTP server and enter FTP client view.
This command applies to IPv6 networks.
If you use this command without specifying any parameters, you will simply enter the FTP client view
without logging in to an FTP server.
If you specify the parameters, you will be asked to enter the username and password for accessing the
FTP server.
60