Send - HP A8800 Series Fundamentals Command Reference

send

Syntax
send { all | num1 | { aux | console | vty } num2 }
View
User view
Default level
1: Monitor level
Parameters
all: Sends messages to all user interfaces.
num1: Absolute number of a user interface.
aux: AUX user interface.
console: Console user interface.
vty: VTY user interface.
num2: Relative number of a user interface. For information about valid values, see Fundamentals
Configuration Guide.
Description
Use send to send messages to the specified user interfaces.
To end message input, press Ctrl+Z. To cancel message input and exit to user view, press Ctrl+C.
Examples
# Send message hello abc to the console user interface.
<Sysname> send console 0
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello abc^Z
Send message? [Y/N]:y
<Sysname>
***
***
***Message from con0 to con0
***
hello abc
<Sysname>
# Before you restart the router, inform other login users so they prepare for the reboot:
1. Display which user interfaces are being used.
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
37