Parity - HP A8800 Series Fundamentals Command Reference

In non-FIPS mode, use lock to lock the user interface by password protection. This method prevents
unauthorized users from using the user interface.
When entering the lock command, you are asked to enter a password (up to 16 characters) and then
confirm it by entering the password again. To successfully set the password, enter the same passwords.
After locking the user interface, next time you enter this user interface, you must press Enter and enter the
correct password.
By default, this function is disabled.
This command is not supported in FIPS mode.
Examples
# Lock the current user interface.
<Sysname> lock
Please input password<1 to 16> to lock current user terminal interface:
Password:
Again:
Password:
<Sysname>

parity

Syntax
parity { even | mark | none | odd | space }
undo parity
View
User interface view
Default level
2: System level
Parameters
even: Performs an even parity check.
mark: Performs a mark parity check.
none: Performs no parity check.
odd: Performs an odd parity check.
locked !
34