Hotkey - HP A8800 Series Fundamentals Command Reference

hotkey

Syntax
hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command
undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }
View
System view
Default level
2: System level
Parameters
CTRL_G: Associates hot key Ctrl+G to the specified command.
CTRL_L: Associates hot key Ctrl+L to the specified command.
CTRL_O: Associates hot key Ctrl+O to the specified command.
CTRL_T: Associates hot key Ctrl+T to the specified command.
CTRL_U: Associates hot key Ctrl+U to the specified command.
command: Command line associated with the hot key.
Description
Use hotkey to associate a hot key to a command.
Use undo hotkey to restore the default.
By default:
• Ctrl+G is assigned the display current-configuration command.
Ctrl+L is assigned the display ip routing-table command.
•
Ctrl+O is assigned the undo debugging all command.
•
No command is assigned to Ctrl+T or Ctrl+U
•
You can modify the associations as needed.
Examples
# Associate the hot key Ctrl+T to the display tcp status command.
<Sysname> system-view
[Sysname] hotkey ctrl_t display tcp status
# Display the configuration of hotkeys.
[Sysname] display hotkey
----------------- HOTKEY -----------------
Hotkeys Command
CTRL_G display current-configuration
CTRL_L display ip routing-table
CTRL_O undo debug all
CTRL_T display tcp status
Hotkeys Command
=Defined hotkeys=
=Undefined hotkeys=
.
7