Table of Contents
Advertisement
43-725.fm Page 12 Tuesday, February 23, 1999 2:47 PM
1. Set
to
DIAL MODE
2. Lift the handset and listen for a dial
tone.
Press any number other than
Note: If your phone system requires
that you dial an access code (9, for
example) before you dial an outside
number, do not press the access
code number either.
If the dial tone stops, you have
touch-tone service. Leave
set to
.
MODE
T
If the dial tone continues, you have
pulse service. Set
(pulse).
3. Press
or place the handset on
TALK
the base to hang up.
TURNING THE BASE'S
RINGER ON AND OFF
To turn off the base's ringer, set
on the back of the base to
still make or receive calls using this
phone. Telephones on the same line
12
(tone).
and the TAD's handset still ring when
T
there is an incoming call.
Note: When the base's ringer is turned
off and the handset is in its cradle, the
phone does not ring. If the handset is
not in the cradle, the phone rings.
.
0
To turn on the base's ringer, set
to
DIAL
SETTING THE RINGER
TONE/VOLUME
to
DIAL MODE
P
You can select one of four different ring-
er tone/volume settings while the phone
is not in the talk mode.
Press
ringer level setting.
RINGER
. You can
OFF
.
ON
to advance to the next
VOLUME
RINGER
VOLUME
Advertisement
Table of Contents
