Singer Futura CE-200E Service Manual page 50

Service Manual
37-2. Mechanical origin point and maximum
2. If there is a malfunction, it is necessary to remove cover for embroidery unit.
Hoop stop position differs depending upon timing of sensor light blocked by X sensor
plate.
Adjustment is to be made by changing position of sensor plate after loosening fixing
screw below flat cable.
Also check to see if sensor plate passes through groove of sensor with enough depth.
If there is problem, hoop may shift excessively and motor may not stop resulting in
abnormal noise.
Before sensor light is blocked
Adjustment to be made by loosening fixing screw for sensor plate and shifting sensor
plate either to the right or left until right position is obtained.
If it is shifted to the left, hoop stops early since sensor light is blocked early.
If it is shifted to the right, hoop may shift excessively, since sensor light is blocked
late,
Under the situation above, motor may be forced to run resulting in abnormal noise
generated by motor.
moveable area (continued)
After sensor light is blocked, hoop
stops shifting.
Original issue
Feb. 2007
Page 50/55
Model
CE-200E