Arming/Disarming With Be 300 Lsn (User Code); Perimeter Arm With Door Contact - Bosch BE 300 LSN User Manual

Arming/Disarming with BE 300 LSN (user code)

Perimeter arm with door contact

1.
Press the "Perimeter" key.
1
Perimeter
2.
Enter the user code and confirm your entry with the "OK" key.
OK
3.
Use the paging keys to select the internal programs for activa-
tion. No selection is necessary if there is only one internal
program (continue to point 4).
Perimeter arm
Code ?
Perimeter arm
All IPs
Perimeter arm
IP 2
4.
Press the "OK" key. Activation of the internal program is
started.
The door contact is not activated until after the activation de-
lay. The buzzer sounds at intervals during the delay (faster for
the last 10 s). The room must be left in this delay.
OK
5.
Coded mode is no longer active after activation and the
standby image appears on the display.
9
Arm in 15 s
NZ 300 LSN
BOSCH