Table of Contents
Advertisement
Arming/Disarming
Arming/Disarming
Arming/Disarming
Arming/Disarming
Arming/Disarming
T T T T T ur ur ur ur urning t
ning t
ning t
ning the Sy
ning t
he Sy
he Sy
he Sys s s s s t t t t t em On
he Sy
The security system can be turned on (armed) in many
different ways, depending on the arming command
used. The basic arming command arms the entire
system. The simplest way to arm the entire system is
to enter your passcode or COMMAND 1.
There are several other arming commands to turn the
system on. These are described later in this guide.
To Arm the Security System:
To Arm the Security System:
To Arm the Security System:
To Arm the Security System:
To Arm the Security System:
1. Enter your passcode and press ENT
2. The command center briefly displays ARMING
and the exit delay tone begins. After exit delay
time expires, the display changes to idle armed
text.
em On
em On
em On (Ar
em On
(Ar
(Ar
(Arming)
(Ar
ming)
ming)
ming)
ming)
ENT
ENT
ENT.
ENT
ARMING,
ARMING
ARMING
ARMING
T T T T T ur
ur urning t
ur ur
ning t
ning t
ning t
ning the Sy
he Sy
he Sy
he Sys s s s s t t t t t em Of
he Sy
(Disarming)
(Disarming)
(Disarming)
(Disarming)
(Disarming)
The security system is turned off by entering your
personal passcode. When the system is turned on, you
must enter through a designated entry door to prevent
an instant alarm condition. Opening the door starts
entry delay time and the Command Center emits a
pulsing "beep" tone to remind you to turn the system
off. Enter your passcode before the delay time expires
and the system turns off.
If you enter through the wrong door or fail to disarm
before the entry delay time expires, you cause an alarm.
If this happens, silence the alarm (by entering your
personal passcode and pressing ENT
security company to notify them that it is not an
emergency situation.
em Off f f f f
em Of
em Of
em Of
ENT) and call your
ENT
ENT
ENT
25
Advertisement
Table of Contents
