Configuring the drive object
6.1
Configuring the drive unit
In the example configuration, the "S120_CU320_2_DP" drive unit is configured for operation
in the online mode. Through automatic configuration, the drive is initially switched to the
"Factory settings" state and then provided with a standard configuration.
Procedure
1. Go to the menu items "Project > Connect to selected target devices" to switch to online
Getting Started
Getting Started, (GS1) 04/2014, 6SL3097-4AG00-0BP3
mode.
When connecting with a target device for the first time, the target device selection is
opened. The "DEVICE" option is activated as the access point.
Figure 6-1
Target device selection
6
37