Configuring The Motor Module - Siemens Sinamics S120 Getting Started

Configuring the drive object

6.2 Configuring the Motor Module

7. Click on button "Create".
The automatic configuration process commences. When the process has been
completed, a window with the message "Automatic configuration is complete" opens.
Figure 6-5
Note
The above message appears because two drives are integrated in the training case. For
our example configuration, however, we only put one drive into operation.
8. Click on the button "Stay ONLINE."
6.2 Configuring the Motor Module
The Control Unit has detected the connected Motor Module and the SMI motor during the
automatic configuration process. The device data have been transferred to the Control Unit.
The Control Unit has automatically entered the correct device data into the parameters
required to operate the components.
The sample project is now ready to commission.
40
Automatic configuration, stay online
Getting Started, (GS1) 04/2014, 6SL3097-4AG00-0BP3
Getting Started