Display And Controls - Siemens SIRIUS 3RW44 System Manual

Display, Controls and Device Interfaces
4.1

Display and Controls

Graphic display
Controls
OK
ESC
4-2
A graphic display on the front of the device provides information about the
functions and statuses of the soft starter via plain text and symbols when control
voltage is applied.
1 2 3
1.
Displays the control unit
that has current control
priority, i.e. sends the
control commands for the
motor.
Display with keys
Serial interface
Control inputs
PLC via Profibus
PC via bus
?
No control device
Figure 4-1:Key to symbols
There are four keys for operating and adjusting the soft starter:
The current function, which is dependent on the menu item, is shown as text on
the display above this key (e.g. select menu, change value or save settings).
The up/down keys are used to navigate through the menu items or to change
number values in the settings menu item.
The ESC key is used to quit the current menu item and to jump back to the
higher-level menu item.
2.
Displays the defined
user level.
Customer read
only
Customer write
3.
Displays the current
motor status.
No motor
Run up
Motor running
Stopping
Motor ready to
start
SIRIUS 3RW44 System Manual
GWA 4NEB 535 2195-02 DS 04