Cisco MDS 9216 Configuration Manual page 88

Using VSAN Filters to Specify N-Port Traffic
switch(config-span)# source interface svc 3/1 tx traffic-type initiator
Configures VSAN 2 as a session filter to only span traffic in VSAN 2. This will specifically monitor
Step 4
traffic on the initiator N-port traffic in VSAN 2.
switch(config-span)# source filter vsan 2
Configures VSAN 4 and 5 as a session filter to additionally span initiator N-port traffic in these two
Step 5
VSANS.
switch(config-span)# source filter vsan 4-5
Cisco MDS 9000 Family SAN Volume Controller Configuration Guide
9-4
Chapter 9 Configuring SPAN on SVC Interfaces
78-16119-01, Cisco MDS SAN-OS Release 1.3