Cisco MDS 9216 Configuration Manual page 52

Configuring VDisks
The online status for each VDisk indicates that formatting is complete.
Note
Use the show cluster cluster-name mdisk-group command to verify the number of VDisks created in
Step 6
each MDisk.
switch(svc)# show cluster SampleCluster mdisk-grp
-------------------------------------------------------------------------------
name
-------------------------------------------------------------------------------
finance
marketing
Use the show cluster cluster-name iogroup command to verify the number of VDisks available for each
Step 7
I/O group.
switch(svc)# show cluster SampleCluster iogroup
------------------------------------------
ID Name
------------------------------------------
1 io_grp0
2 io_grp1
3 io_grp2
4 io_grp3
5 recovery_io_grp
The
Note
recovery-io-group
Cisco MDS 9000 Family SAN Volume Controller Configuration Guide
5-4
Capacity free
7.56 GB 5.56 GB
6.48 GB 2.48 GB
Node count Vdisk count
2 3
2 1
0 0
0 0
0 0
is an internal SVC I/O group created for cluster recovery processes.
extent number number
size(MB) of mdisks of vdisks
16 5 1
16 5 3
78-16119-01, Cisco MDS SAN-OS Release 1.3
Chapter 5 Managing Virtual Disks
status
online
online