Canon imagepress C7000VPE Service Manual page 51

Table 38 – Periodic Maintenance Schedule Continued
Part Name
Item
 Clean
Sub Hopper Filter
Hopper Right Louver
Secondary Transfer Inlet
Guide (Lower)
Secondary transfer outlet
sensor
Secondary transfer outlet
guide
Skew registration skew
roller
Pre-fixing feed belt
Shield plate (pre-transfer
charging unit)
Fixing web
Fixing thermistor
(Secondary)
Fixing thermistor (Primary)
Fixing thermal switch
(Secondary)
Fixing thermal switch
(Primary)
Fixing inlet guide
Delivery upper separation
plate
Delivery lower separation
claw
Auto Gradation Adjustment
Drum cleaner pre-exposure
unit
ITB HP sensor
ITB edge sensor
ITB idler roller (ITB-CLN
opposite roller 2)
17 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier.
Data is subject to change depending upon many factors including, without limitation, monthly copy
volume, environment, type of image printed and customer handling of the equipment.
imagePRESS C7000VPe Service Guide
Main Unit Periodic Maintenance
Estimated Interval
 Replace  Lubricate








 








imagePRESS C7000VPe Service Guide
17
 Adjust

Replace every 1,800,000
Use a blower brush.
Use a blower brush.
When coated paper is used
frequently, clean the Skew Roller
in every 100,000 pages.
Apply using lint free paper and
alcohol.

Apply using lint free paper and

alcohol. Replace at the same
time as the fixing rollers.


Use methylketone and lint free
paper.

Recommended on first power-on
Clean using lint free paper with

alcohol

Use a blower brush.

Apply using lint free paper and

alcohol.
Remarks
 Inspect
April 2013
Page 46