Canon imagepress C7000VPE Service Manual page 44

Table 28 – Main Unit Consumable Parts Continued
Item
Slave roller (Delivery
inversion roller unit)
Tandem slave roller
Bypass slave roller
Slave roller (confluence
unit)
Outside delivery roller
De-curl roller
Bypass feed roller A
Bypass Feed Roller A
(Merging Unit)
Bypass Feed C Roller C
Delivery inversion roller
Duplexing inversion roller FC9-9464-000
Sponge roller
Feed belt (confluence
unit)
Feed belt (duplexing de-
curler)
Decurler backup roller
cleaning brush
Drum patch sensor (Y,M)
3 Item Numbers and Part numbers are subject to change without notice.
14 Estimated average values in the field, based on data from supplier. Data is subject to change depending upon
many factors including, without limitation, monthly copy volume, environment, type of image printed and
customer handling of the equipment.
imagePRESS C7000VPe Service Guide
3
Item Number Quantity
3
2
FL2-2016-000
3
2
FC5-9885-000 1
FC5-9904-000 2
FC5-9833-000 2
FC9-5900-000 1
FC5-9835-000 1
FC6-2280-000 3
2
FC6-3342-000 1
FC7-4600-000 10
FC7-4600-000 10
FL3-5095-000 2
FM4-2561-000 2
imagePRESS C7000VPe Service Guide
14
Estimated Life (copies/prints)
@ 50%
LTR
11"x17"
4,500,000 3,000,000 2,500,000
4,500,000
3,000,000 2,500,000
4,500,000 3,000,000 2,500,000
4,500,000 3,000,000 2,500,000
4,500,000 3,000,000 2,500,000
1,000,000 666,667
2,500,000 Apply grease to inner
4,500,000 3,000,000
4,500,000 3,000,000 2,500,000
4,500,000 3,000,000 2,500,000
2,500,000 Use at the time of
4,500,000 3,000,000
4,500,000 3,000,000 2,500,000
4,500,000 3,000,000 2,500,000
1,000,000 666,667
1,500,000 1,000,000
250,000 250,000
4,500,000
4,500,000 4,500,000
Remarks
@ 80%
11"x17"
Use at the time of
reverse delivery or 2-
sided copy.
Apply grease to inner
circumference of
bearing at
555,556
circumference of
bearing at
replacement. (Super
Lube grease)
reverse delivery and
2-sided copy. Apply
grease to inner
circumference of
bearing at
replacement. (Super
Lube grease)
Change
simultaneously with
the Decurler Drive
Roller.
Apply grease to inner
555,556
circumference of
Shaft Support at
replacement. (Super
Lube grease)
Apply grease to inner
circumference of
833,333 Shaft Support at
replacement. (Super
Lube grease)
250,000
April 2013
Page 39