Using Frequency Copy; Specified Channel - Radio Shack PRO-95 Owner's Manual

WX Alert and Beep Tone
Confirmation
1. To test the WX alert, press
for more than 2 seconds while
DIG WX STBY
appears.
The display indicates the type
of message, and the scanner
sounds an alert or series of
beeps. The beeps automati-
cally change every 3 seconds.
2. Press any key except
stop test sound mode.
U F
SING REQUENCY
You can copy a frequency into a
specified channel, a vacant
channel in a specified bank, or a
priority channel. However, you
cannot copy a frequency from the
Marine and CB search bands.
Copying a Frequency into
a Specified Channel
You can copy a frequency into a
specified channel when the
scanner stops on that frequency
during search mode or manual
tuning.
1. Press then
FUNC PGM
you find a frequency.
Chan Store?
appears on the
bottom line. After about 1
second, the frequency to be
copied flashes on the
indicator.
2. Press the desired bank and
the channel number where
you want to store the
frequency. The display
indicates the bank and
channel number. After about 1
WX
to
C
OPY
when
41