Radio Shack PRO-76 Owner's Manual page 42

20-313.fm Page 42 Friday, January 7, 2000 3:09 PM
PROBLEM POSSIBLE CAUSE
Scanner is on Only one channel is
but will not (or no channels
scan are) stored.
(continued)
The scanner is not
set to scan.
All channels are
locked out.
During scan- Programmed fre-
ning, the scan- quencies are the
ner locks on same as "birdie"
frequencies frequencies.
that have an
unclear trans-
mission.
SQUELCH might
not be set properly.
42
SOLUTION
Store frequencies into more
than one channel.
Press SCAN.
Make sure at least two
channels are not locked out.
Avoid programming fre-
quencies listed under
"Birdie Frequencies" on
Page 34, or only listen to
them manually.
Be sure SQUELCH is ad-
justed properly. See "Turn-
ing On the Scanner/Setting
Volume and Squelch" on
Page 22.