Using Search Skip Memory; Using Priority - Radio Shack PRO-76 Owner's Manual

20-313.fm Page 30 Friday, January 7, 2000 3:09 PM
Notes:
• You can manually select
any channel in a bank,
even if the bank is
turned off.
• You cannot turn off all
banks. One bank
always active.
USING SEARCH
SKIP MEMORY
You can skip specified fre-
quencies during a limit or di-
rect search. This lets you
avoid unwanted frequencies
or ones you have already
stored in a channel. You can
program up to 20 frequen-
cies to be skipped into the
scanner's memory.
To skip a frequency, press
when the scanner stops
S/S
on the frequency during a
limit or direct search.
(lockout) appears the next
time you display that fre-
quency.
To clear a single frequency
from search skip memory so
the scanner can stop on it
during a limit or
search, press to hold
HOLD
the search. Then press
to select the frequency
30
(where L/O
hold down
appears.
To clear all the skip fre-
quencies from search skip
memory at once, during a
search, hold down
is
the scanner beeps twice.
Notes:
• If you program more
than 20 skip frequen-
cies,
quency
you stored earlier, start-
ing from the first stored
frequency.
• You can select a skipped
frequency by using
when the scanner is
holding.
when
skipped frequency.

USING PRIORITY

L/O
You can scan through chan-
nels and still not miss impor-
tant calls on specific chan-
nels. You can program one
stored channel in each bank
as a priority channel (for up
to a total of 10 stored chan-
direct
nels). As the scanner scans
the bank, if the priority fea-
or
ture is turned on, the scan-
ner checks
appears). Then
until dis-
S/S L/O
until
S/S
each new fre-
replaces one
or
appears
L/O
you select a
the priority