Finding And Storing Active Frequencies; Using Limit Search - Radio Shack PRO-76 Owner's Manual

20-313.fm Page 23 Friday, January 7, 2000 3:09 PM
4. Press to store the fre-
E
quency into the channel.
Notes:
• If you made a mistake
in Step 3,
Error
appears and
scanner beeps three
times when you press
. Simply start again
E
from Step 3.
• Your scanner auto-
matically rounds the
entered frequency
down to the closest
valid frequency. For
example, if you enter
a frequency
151.473, your scan-
ner accepts
151.475.
5. Repeat Steps 1–4 to
program more
nels. Or to program the
next channel
sequence, repeat Steps
2–4.
To listen to a stored frequen-
cy, press , enter the
MANUAL
channel number, then press
again.
MANUAL
FINDING AND
STORING ACTIVE
FREQUENCIES

Using Limit Search

the
A limit search lets you
search for active frequencies
between upper and lower
limits that you set.
during a limit search.
Follow these steps to enter
the search frequency range.
1. Press
appears.
Lo
of
2. Use the number keys
it as and • to enter the lower
limit frequency of the
range
search.
chan-
3. Press
in appears.
Note: If the frequency
you entered is not valid,
Error
different frequency then
repeat Step 3.
4. Use the number keys
and • to enter the upper
limit frequency of the
range
search.
5. Press
appears
L
then .
PROG LIMIT
you want to
then . Hi
E LIMIT
appears. Enter a
you want to
.
E
23