Using Ac Power - Radio Shack PRO-76 Owner's Manual

20-313.fm Page 11 Friday, January 7, 2000 3:09 PM
Warning: Never use the
jack when you have
CHARGE
installed non-rechargeable
batteries. If you try to re-
charge non-rechargeable
batteries, they become very
hot and could explode.
Remove the plastic plug
from the jack before
CHARGE
you use it, then replace the
plug when you finish.
POWER
CHARGE

USING AC POWER

You can power the scanner
using a 9V, 300-mA AC
adapter and a size
®
Adaptaplug adapter (nei-
ther supplied). Both
available at your local Ra-
dioShack store.
Cautions:
!
supplies 9V DC and de-
livers at least 300 mA.
Its center tip must be set
to positive and its plug
must fit the scanner's
POWER
adapter that does not
meet these specifica-
tions could damage the
scanner or the adapter.
• Always connect the AC
adapter to the scanner
before you connect it to
AC power. When you
finish, disconnect
adapter from AC power
before you disconnect it
from the scanner.
To power the scanner using
an AC adapter, attach the
Adaptaplug adapter to the
H
AC adapter so the tip reads
positive (+), then insert the
are
Adaptaplug adapter into the
scanner's
Then connect the other end
of the adapter to a standard
AC outlet.
You must use a
Class 2 power
source that
jack. Using an
the
jack.
POWER
11