Manually Selecting A Channel - Radio Shack PRO-528 User Manual

• To listen to a weak or distant
station, turn SQUELCH
counterclockwise.
• To ensure proper scanning, adjust
SQUELCH until the audio mutes
• To scan in the trunk scanning
mode, see "trunking operation."

manually selecting a channel

You can continuously monitor a single
channel without scanning. This is useful
if you hear an emergency broadcast on
a channel and do not want to miss any
details —even though there might be
periods of silence — or if you want to
monitor a specifi c channel.
Press SCAN/MANUAL to stop scanning,
enter the channel number, and then press
SCAN/MANUAL. The selected channel
appears.
Or, during scanning, if the radio stops at a
channel you want to listen to, press HOLD/
RESUME. Press HOLD/RESUME to resume
automatic scanning.
Beyond the Basics
31