Priority Talk Group Id Scanning - Radio Shack PRO-528 User Manual

number. The scan list number turns off,
and the IDs in that list are not scanned.
Note: One of the ten scan lists must
always be active. You cannot remove
Notes
all of them.
To restore a scan list to active scanning,
use the number keys to enter the number
of the list again.

priority talk group ID scanning

You can assign a priority to a favorite ID so
during scanning the scanner checks that ID
more frequently than the others in the list.
Each of the ten memory locations reserved
for storing lists (see "using talk group ID
lists") can have only one priority ID, and the
ID assigned that priority in List 1 has the
highest priority of all.
To assign a priority to an ID, press and hold
PRI. P appears.
To turn priority ID scanning on or off,
repeatedly press PRI during ID scanning or
manual operation.
PRI appears when priority scanning is
turned on.
Note: Priority ID scanning does not
operate when priority IDs are locked
Notes
out. See "locking out talk group IDs".
Beyond the Basics
69