Fcc Notice - Radio Shack PRO-528 User Manual

1,000-channel handheld trunking scanner
Hide thumbs Also See for PRO-528:
Table of Contents

Advertisement

Beyond the Basics
Follow these steps to restore the 150
preprogrammed frequencies stored in the
private bank.
1. Make sure your scanner is turned off.
2. Press 3 and E/PGM simultaneously
while turning on the scanner. After
several seconds, the scanner restores
the frequencies.

FCC notice

Your scanner might cause radio or TV
interference even when it is operating
properly. To determine whether your
scanner is causing the interference, turn off
your scanner. If the interference goes away,
your scanner is causing it. Try the following
methods to eliminate the interference:
• move your scanner away from the
receiver
• connect your scanner to an outlet that
is on a different electrical circuit from the
receiver
• contact your local RadioShack store for
help
Note: Mobile use of this scanner is
unlawful or requires a permit in some
Notes
areas. Check the laws in your area.
84

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

20-528

Table of Contents