Radio Shack PRO-528 User Manual page 55

depending upon the trunk system
selected.
Notes:
• If you enter an invalid frequency
(outside the selected range),
the scanner beeps, the channel
number fl ashes and Error appears.
If this happens, press •/CLR /
DELAY to clear the frequency, then
repeat the entry.
• For EDACS (Ed) and LTR systems,
Notes
you must enter the frequencies
in logical channel number (LCN)
order.
• If you try to enter a duplicate
frequency in a bank, the scanner
beeps and the channel which was
previously stored appears
5. Press
channel in the bank and repeat Step 4
to enter frequencies in that bank.
6. Repeatedly press •/CLR /DELAY to
return back to Step 2. Repeat Steps 2
and 5 until all frequencies have been
entered.
7. Press SRCH to begin searching for
the trunk's data channel and scan
conventional frequencies at the same
or to select the next
55
Beyond the Basics