Manually Selecting A Channel - Radio Shack Race Scanner Owner's Manual

To skip a frequency, press
scanner stops on the frequency during a
search. The scanner stores the frequen-
cy in memory and automatically resumes
the search.
To clear a single frequency from search
skip memory so the scanner can stop on
it during a search, follow these steps.
1. Press
HOLD
2. Press or
)
3. Press
S/S
To clear all the search skip frequencies at once, during a search, press
, then hold down
HOLD
onds).
Notes:
• If you skip all the frequencies in the weather band, the scanner will
not start searching. In this case, the scanner sounds three beeps.
• If you program more than 20 frequencies to skip, each new fre-
quency replaces one you already stored, starting from the first fre-
quency you stored.
• You can manually select a skipped frequency.
display when you select a skipped frequency.

MANUALLY SELECTING A CHANNEL

You can continuously monitor a single channel without scanning. This
is useful if you hear an emergency broadcast on a channel and do not
want to miss any details — even though there might be periods of si-
lence — or if you want to monitor a specific channel.
28
S/S
to hold the search.
to select the frequency.
(
. disappears from the display.
L/O
until the scanner beeps twice (about 3 sec-
S/S
when the
L/O
PR OG
MA N
B A N D
R A C E
1-10
11-20
1
HOLD
D A T A
PRIORITY L-O UT 31-40 41-50
4
H/S S/ S
61-70 71-80
DEL
7
KEYLOCK CLEA R
91-100
appears.
appears on the
L/O
S C A N
2 1 - 3 0
2 3
51-60
5 6
81-90
8 9
W X
0
E