Beyond The Basics; Copying/Moving A Frequency - Radio Shack PRO-528 User Manual

Beyond the Basics

• If you entered a frequency in
• The scanner automatically rounds
• After a transmission, the scanner
6. To program the next channel in
sequence, press
Steps 4 and 5.

copying/moving a frequency

If you want to copy/move a frequency to a
channel, follow the steps below:
1. Manually select the channel which
contains the frequency you want to
copy or move.
Step 4, which already exists on
another channel, the scanner beeps
an error tone and displays that
channel. Press •/CLR /DELAY to
clear the display, or press E/PGM
to store the frequency in both
channels.
the entered number to the nearest
valid frequency. For example, if you
enter 151.473 (MHz), your scanner
accepts it as 151.475.
automatically pauses for 2 seconds
on this channel before proceeding
to the next active transmission.
Press •/CLR /DELAY to turn the
delay function off or on. See
"delay"). The scanner stores this
setting in the channel.
or
22
and repeat