Locking Out Talk Group Ids; Delay Function In Id Indication Mode; Reviewing Locked-Out Talk Group Ids; Clearing Talk Group Ids - Radio Shack PRO-2053 Owner's Manual

Locking Out Talk Group IDs

Note: You can only lock out talk group IDs
when the scanner is in the closed mode (see
"Open and Closed Modes" on Page 38).
1. Press .
PROG
2. Press .
TRUNK
8 8 8 8
3. Press ,
FUNC
desired bank.
8 8 8 8 9 9 9 9
4. Press or
5. Press
L/OUT
appears.
6. To remove the lockout from a trunking
ID, manually select the ID memory, and
press until
L/OUT
While the scanner shows a text tag you can
confirm the ID code when the received signal
is the voice channel.
1. Press while the scanner is receiv-
TEXT
ing the voice channel and displaying the
text tag. The ID code appears as
)+0è444444 or ! è4444 )+0è444444 ! è4444
)+0è444444 )+0è444444 ! è4444 ! è4444
2. Press again to cancel.
TEXT
Delay Function in ID Indication
Mode
You can set the ID delay function separately
from channel delay.
1. Press then
FUNC
programming the trunked ID.
FNEýB<PJýKFýJ<Ký% ý;<C8P FNEýB<PJýKFýJ<Ký% ý;<C8P.ý ý ý ý ðôòýJ<:FE;J FNEýB<PJýKFýJ<Ký% ý;<C8P FNEýB<PJýKFýJ<Ký% ý;<C8P
appears.
8 8 8 8 9 9 9 9
2. Press or
ðôò, ðôí ðôò ðôò ðôò ðôí ðôí ðôí, ïôò ïôò, ïôí ïôò ïôò ïôí ïôí or îôò ïôí
3. Press .
ENTER
9 9 9 9
or to move to the
to select the ID memory.
to lock out the ID.
ý ý ý ý
disappears.
( ( ( (
.
while you are
./DELAY
1J<ý 1Gó 1J<ý 1Gó
1J<ý 1Gó 1J<ý 1Gó
ðôòýJ<:FE;J ðôòýJ<:FE;J ðôòýJ<:FE;J
to select
*FE<, òôí *FE< òôí, ñôò
*FE< *FE< òôí òôí
.
îôò îôò J<:FE;J îôò J<:FE;J J<:FE;J J<:FE;J
Trunking Operation
If the ID delay is active, it watches the control
channel command for the delay time when-
ever the signal disappears from the voice
channel.
Reviewing Locked-Out Talk Group
IDs
Note: You cannot clear all lockouts from a
talk group at the same time.
1. Press
2. Press
B B B B ID appears. If the ID memory bank has
no locked out ID, you hear the low beep
tone.
3. Press
search bank. Or, just press
search for any locked out IDs in a bank.

Clearing Talk Group IDs

1. Press
2. Press
memory.
3. Press
Clearing All Talk Group IDs in One
Bank
You can clear all talk group IDs within a
bank. This lets you quickly delete all talk
group IDs from a bank if you want to use the
bank to store different data (such as a new
set of talk group IDs).
1. Press
2. Press
memory mode.
ñôò, ñôí ñôí,
ñôò ñôò ñôí ñôí
3. Select a talk group ID bank using
8 8 8 8
then
PROG TRUNK
then
FUNC L/OUT
8 8 8 8
then
FUNC
then
PROG TRUNK
8 8 8 8
, or
FUNC
then
FUNC CLEAR
.
PROG
to enter a talk group ID
TRUNK
9 9 9 9
or .
.
. The locked out
9 9 9 9
or to select a
8 8 8 8 9 9 9 9
or to
.
9 9 9 9
to select ID
.
,
FUNC
37