Talk Group Id Hold; Turning Sub-Banks On Or Off - Radio Shack PRO-2053 Owner's Manual

6. Enter the talk group ID and press
. If necessary, use the decimal
ENTER
point for a hyphen.
8Wdaý&#& 8Wdaý&#& 8Wdaý&#& 8Wdaý&#&
?:ýD ?:ýD ?:ýDe$ e$ e$ e$ý&& ?:ýD ý&& ý&& ý&&
CEJ0ý&(//( CEJ0ý&(//(
CEJ0ý&(//( CEJ0ý&(//(
?:ç &((/( ?:ç ?:ç ?:ç &((/( &((/( &((/(
7. If you want to tag the ID, press
enter the desired text tag for the ID, then
press . (See "Text Input Chart" on
ENTER
Page 17.)
8. To store the next ID memory in
sequence, press
Next ID location
9. Press to start scanning.
SCAN
Notes:
• If you made a mistake in Step 6,
. appears and the scanner
%EM8C@;ý % %EM8C@;ý %
%EM8C@;ý % %EM8C@;ý %
beeps when you press
again at Step 3.
• You can enter either decimal or AFS
code for ED (EDACS) ID. The default
setting is decimal ID entry. When you
press
FUNC
appears for about 2 seconds. Now
you can enter the ID code with AFS
format.
• If you entered an ID code that is
already stored in another ID channel,
appears. If you want to store
LGCý % LGCý %
LGCý % LGCý %
36
ED ED ED ED
TEXT
8 8 8 8
and repeat Step 4.
8Wdaý&#& 8Wdaý&#& 8Wdaý&#& 8Wdaý&#& ED ED ED ED
?:ýDe$ e$ e$ e$ý&' ý&' ý&' ý&' ?:ýD
?:ýD ?:ýD
CEJ0ýded[ CEJ0ýded[
CEJ0ýded[ CEJ0ýded[
. Start
ENTER
then ,
2
ã"/ý =FID8K ã"/ý =FID8K ã"/ý =FID8K ã"/ý =FID8K
Trunking Operation
the ID code, press
the operation, press
8Wdaý&#& 8Wdaý&#&
8Wdaý&#& 8Wdaý&#&
?:ýD ?:ýDe$ e$ e$ e$ý&& ?:ýD ?:ýD
CEJ0ý&(//( CEJ0ý&(//( CEJ0ý&(//( CEJ0ý&(//(
:kfbý?:ý'#'( :kfbý?:ý'#'(
:kfbý?:ý'#'( :kfbý?:ý'#'(

Talk Group ID Hold

,
You can set your scanner to follow a trunking
signal that you want to track during scanning.
While the scanner is stopped on a voice
channel ( appears), hold down
2á 2á
2á 2á
more than 2 seconds.
When ID hold is active and the scanner re-
ceives a voice channel, the scan indication
at the first digit in the top line is changed to
To release ID hold, press

Turning Sub-Banks On or Off

During program mode, follow these steps to
turn the ID sub-bank on or off.
1. Press
TRUNK
bank.
2. Press
FUNC
off.
During scan mode, follow these steps to turn
the ID sub-bank on or off.
1. Press
FUNC
stopped at a voice channel.
2. Press
TRUNK
which sub-bank is turned on or off, and
the active sub-bank number flashes.
3. Press
FUNC
desired sub-bank to turn it on or off.
. To cancel
ENTER
.
CLEAR
ED ED ED ED
ý&& ý&& ý&&
TRUNK
appears.
% ý?FC;ý+*ô % ý?FC;ý+*ô % ý?FC;ý+*ô % ý?FC;ý+*ô
or
SCAN TRUNK
to select the desired sub-
then to turn the bank on or
1
while the scanner is
. The display indicates
and the number of the
for
/ / / /
.
$ $ $ $
.